Tuttnauer Elara 11 Autoclave

The Tuttnauer Elara 11 autoclave is designed for sterilization of wrapped, porous and hollow loads. The chamber volume is large, external dimensions are small, making it especially suitable for smaller clinics requiring a high turnover. The control system is smart and intuitive, easy to use and has a large memory for consistent and reliable performance.

• Short cycle and high volume pre and post vacuum pump for perfect class B sterilization results
• 316L grade stainless steel chamber and door with electro-polish finish
• A built-in steam generator provides steam and facilitates a standby steam mode
• The door closes smoothly and locks automatically

• Large 28.5 Liter chamber within a small foot print. A perfect fit for standard 60 cm shelves or counters
• Provided with 5 stainless steel trays and can also hold cassettes
• Water filling from the front economizes on office space by eliminating the need to keep the top of the autoclave accessible

• A cycle will not start unless the door is properly locked
• An automated double locking safety device prevents the door from opening while the chamber is pressurized
• An automatic safety shut-off prevents overheating of the chamber
• The autoclave comes with safety pressure-release valves for the chamber and generator

Tuttnauer Elara 11 High-Performance Features

Powerful Vacuum Pump
High-volume, pre and post vacuum pump for optimum sterilization results.

More Chamber Volume
The large 7.5 gallon chamber maintains a compact outer dimension and a small footprint. It is a perfect fit for a standard 24 inch shelf or counter. The larger chamber decreases the number of cycles needed by sterilizing more instruments in one cycle.

New Locking Device and Door
The elegant door is equipped with an automated double safety locking mechanism. With a single slide the door will smoothly close and automatically lock.

Larger Capacity
The Elara11 is provided with 5 stainless steel trays. There is no need to reverse or replace the rack to switch between trays or cassettes.

Convenient Water Filling
Accessible front or top water filling options. The front water-filling economizes on office space by eliminating the need to keep the top of the autoclave accessible.

Designed for Continuous Operation
Steam is continuously provided by an independent steam generator. With the Elara11, there is no waiting time between cycles.

Class B Sterilization Cycles
Pre-vacuum phase efficiently removes air, resulting in the full penetration of steam into wrapped, porous and hollow loads. The post-vacuum drying phase ensures complete drying of wrapped porous loads and hollow instruments. This guarantees that even the most difficult loads will easily reach Sterility Assurance Level (SAL).

The Tuttnauer Elara 11 offers a total of 7 programs: 5 cycle times and 2 test programs, which are the Bowie Dick Test, and the Vacuum Test

• 316L grade stainless steel chamber and door with electro-polish finish
• A cycle will not start unless the door is properly locked
• Automated double locking safety device prevents door from opening while chamber is pressurized
• Automatic safety shutoff prevents overheating of chamber and load
• Two independent clean water level indicators: A digital alert and a visual indicator
• A water level alert indicates when waste water reservoir should be emptied
• Audible signal indicates if cycle is not properly completed

Tuttnauer Elara 11 Class B 220 Volt Pre and Post Vacuum Autoclave Specifications

Chamber Dimensions
11 inches (280mm) x 19.8 inches (504mm)

Chamber Volume
7.5 gal (28.5L)

Number of Trays
5

Tray Dimensions
WxHxD 6.7 inches (170mm) X 0.8 inches (20mm) X 16.3 inches (415mm)

Voltage (V) Freq. (Hz.)
1ph 230V 50/60 Hz*

Current (A) Power (W)
10A 2300W

Overall Dimensions
WxHxD 20.8 inches (530mm) X 17.4 inches (444mm) X 25.4 inches (645mm)

Shipping Weight
184 Pounds (84 kg) (actual device weight 148 pounds)

Warranty
1 year, parts and labor