• Intuitive, easy use with direct function keys
• 12-channel Resting ECG
• Measurements
• Interpretation
• Serial data transfer to PC for storage of both Resting ECG and Spirometry recordings
• XML data transfer for Resting ECG to PC or Information Systems via Ethernet or modem interfaces (optional)
• A4-formated (8.5 x11 inches) printouts on internal or external printer
• Basic Exercise test capability (optional)
• Possibility for external monitor connection (optional)

• Integrated 3-channel monitor
• Alphanumeric keyboard
• Direct keys for the most important functions
• Easy Print: Integrated high-resolution A4 (8.5 x11 inches) thermal printer, subsequent printout on thermoreactive paper possible
• Interface for external printer for A4 (8.5 x11 inches) printouts on regular pape
• • Internal memory for up to 40 records
• Interface for data-transmission

• RS-232 port for peripheral devices such as treadmills,bicycles etc.

• For exercise ECG, several stand-ard protocols are available for bicycle and treadmill ergometers; the user can either select a standard protocol from a table or define a new protocol
• J-point settings: J+20,+40,+60,+80 ms; default: +60 ms

• 3 leads can be selected via direct keys
• Heart rate
• ST slope and amplitude (in mV/mV/s) of a lead (the lead can be selected in the set-up; default is V5)
• Stage,time,and current load
• Blood pressure (Blood pressure measurement: Automatic – if a bicycle contains an interface for the blood pressure transfer – or manual)

• Online printout: 6 leads on the internal thermal printer
• 10-sec.printout: A 10-sec.printout can be initiated at any time on the internal thermal printer
• Two print formats are available for stage printouts on the internal thermal printer: – 2*6 25 mm/s and 50 mm/s,1 page – 4*3 + 1 rhythm,25 mm/s (50 mm/s), 1 page
• Final report: All test data is listed in a tabular form

• The AT-102 is available with the internal SCHILLER Communication Module (SCM),which transmits Resting ECG data on XML format to a PC or Information Systems via: – Ethernet interface; or – Built-in analogue modem (optional)
• This enables the AT-102 to be an integrated part of a larger systems solution
• Secure transmission of patient data via the Internet is possible using 1024-bit strong encryption
• Equipped with the add-on SCM Server, the SCHILLER Data Management System SEMA-200 can receive the XML output from the SCHILLER Communication Module

• Unique SP-250 with disposable sensor to reduce the risk of contamination
• SP-260 with reusable sensor
• Simple and fast calibration
• Memory for up to 40 records
• Inspiratory and exspiratory test; pre and post medication tests – Selectable predicted value tables – Real-time curves and measurement information on the large screen

Specifications

System:
Dimensions: 400 x 330 x 101 mm,approx. 5 kg
Built-in monitor: 120 x 90 mm effective display area, 320 x 240 dots resolution
On-screen status indicators: Battery status, date, time,power source
Control panel and keyboard: User-friendly, alphanumeric keyboard, LED indicator and LC display
Power supply requirements: 220–240 V (nominal), 50/60 Hz; 110–115 V (nominal), 50/60 Hz; stand-alone operation with built-in rechargeable battery; LED indicator for mains operation, integrated power supply unit
Battery capacity: 4 hours of normal use (approx. 300 automatic ECG printouts or 100 spirometry records)
Power consumption: Max. 30 VA
Line frequency filter: Distortion-free suppression of superimposed 50 or 60 Hz sinusoidal interferences by means of adaptive digital filtering (SCHILLER Powerline Filter SPF) Frequency range of digital recording system: 0 Hz – 150 Hz (IEC/AHA)
Chart paper: Thermo-reactive, Z-folded, 210 mm wide (A4, 8.5 x 11 inches)
Printing process: High-resolution thermal head printer,8 dots/mm (amplitude axis), 40 dots/mm (time axis) @ 25 mm/s
Interfaces: RS-232 interface to connect spirometry sensor, data transmission to PC (SEMA-200) and external modem connection; parallel port for external printer; optional Ethernet interface and optional internal modem for XML data transmission
Memory: Possibility to save up to 40 Resting ECG or Spirometry measurements
Environmental conditions:
– Temperature, operating: 10° to 40°C
– Temperature, storage: -10° to 50°C
– Relative humidity: 25 to 95% (no condensation)
– Pressure during operation: 700 to 1060 hPa

Safety Standards:
Safety Standards: IEC/EN 60601-1; UL 60601-1; C22.2 No. 601.1-M90; IEC/EN 60601-2-25; IEC/EN 60601-1-2 (EMC)
Protection Class: I according to IEC/EN 60601-1 (with internal power supply)
Applied Part: CF according IEC/EN 60601-1
Conformity: according Directive 93/42/EEC (Medical Devices)
Classification: IIa according Directive 93/92/EEC

Technical Data for ECG:
Patient input circuit: Fully floating and isolated, defibrillationprotected (only with original SCHILLER patient cable)
Monitor display:
– 3-channel display of the selected leads
– 25, 50 mm/s
– 5, 10,20 mm/mV
– Filter status (on/off)
– Insufficient electrode contact
– Heart Frequency, HF
– mm/mv,mm/s
Leads: 12 simultaneous leads: Standard / Cabrera
Chart printout speed: 5/10/25/50 mm/s (manual print)
Sensitivities: 5/10/20 mm/mV, either automatically adjusted or manually selected
Automatic lead programs:
– 6/12-channel presentations of 12 simultaneously recorded standard leads on one or more A4 (8.5 x 11 inches) pages
– Numerous printout formats can be selected
Data record:
– Patient data (name, age, height,weight, BP), user ID
– Listing of all ECG recording conditions (date, time, filter)
– Measurement program (M): ECG measurements results (intervals, amplitudes, electrical axes), average complexes with measurement reference markings
– Interpretation (C) with adult and pediatric guidance
Recording track: 6/12-channel presentation, optimal positioning on a width of 200 mm,automatic baseline adjustment
Filter: Myogram filter (muscle tremor filter): 25 Hz or 35 Hz, can be switched on/off (SCHILLER Baseline Stabilizer SBS , SCHILLER Smoothing Filter SSF)
ECG amplifier:
– Simultaneous recording of all 9 active electrode signals (= 12 leads)
– Sampling frequency: 1000 Hz
– Pacemaker detection:
2 mV/
0,1 ms

Technical Data for Spirometry (Option):
Measured values:
FVC: FVC, FEV0.5,FEV1.0, FEV3.0, FEV0.5/FVC, FEV1,0/FVC, FEV3.0/FVC, FEF0.2-1.2, FEF25-75%, FEF75-85%, PEF, FEF25%, FEF50%, FEF75%, FIVC, FIV1.0 , FIV1.0/FIVC, FIV1.0/FVC,PIF, FIF50%, FMFT
SVC: SVC, ERV, IRV,TV
MVV: MVV, RR,TV
Presentation possibilities (printout and screen):
– Flow/volume graph
– Volume/time graph
– Table of measured values
– Realtime flow curve
Data record:
– Patient data (name, age, height,weight), user ID
– Registration conditions (date, time, date of last calibration)
– Flow/volume graph and/or volume/time graph
– Table of measured values with PREDICTED/ACTUAL/ DIFFERENTIAL values
– Diagnosis guidance
– Memory for more than 60 ECGs or spirometry records
Prediction equation:
Adults: ECCS,Austria, Crapo, Morris, Knudson, Knudson76, Polgar, Berglund, Finland, India, Composite
Children: Quanjer & Tammeling,Austria, India, Knudson, Knudson76, Polgar
Extrapolated predicted values Comparison of PRE/POST medication is possible
Standards Compliance: ATS, OSHA, NIOSH

SPIROVIT SP-250 Pneumotach Flowsensor for pulmonary function testing with disposable mouthpiece:
Dimensions of SP-250: 118 x 36 x 28 mm,approx. 120 g; 4.6 x 1.4 x 1.1 in.,approx. 0.26 Ibs
Measuring method: Pneumotachometer
Measuring accuracy: According ATS < 3%
Flow impedance: < 0.2 mbar*s/l at 12 l/s
SPIROVIT SP-260 Pneumotach Flowsensor for pulmonary function testing with reusable mouthpiece:
Dimensions of SP-260: 125 x 36 x 28 mm,approx. 160 g; 4.9 x 1.4 x 1.1 in.,approx. 0.34 Ibs
Measuring method, Measuring accuracy, Flow impedance same as SP-250
Scope of delivery:
– 1 pneumotach sensor; choice of SP-250 disposable (P/N 2.100022) or SP-260 reusable sensor (P/N 2.100551)
– Accessories: 2 noseclips and either 1 pack of disposable plastic mouthpieces for SP-250 (P/N 2.100077) or 1 pack
of disposable filters for SP-260 (P/N 2.100123)
– 1 operating manual

Scope of delivery for CARDIOVIT AT-102 Standard:
CARDIOVIT AT-102 Resting ECG with 12 simultaneous leads, pacemaker detection,automatic ECG measurement
Accessories:
– 1 10-lead patient cable
– 1 set of electrodes or disposable electrodes
– 1 power cable
– 1 pack chart paper
– Operating manual
Software options:
– Computer-aided ECG interpretation for pediatric and adult ECGs (C)
– Basic exercise test
– SEMA-200 PC software to save, validate and archieve ECG and spirometry data on PC
Hardware options:
– Equipment trolley
– Spirometry sensor SP-250 or SP-260
– Calibration syringe
– Vacuum electrode system VAC-100
– External printer
– External monitor connection
– Internal SCHILLER Communication Module with optional built-in analogue modem

*Technical Data are subject to change without notice.