Whats The Difference? - Ritter M9 Ultraclave VS Ritter M9D AutoClave
The only difference between the Ritter M9 Ultraclave and the Ritter M9D AutoClave is the automatic door. With the Ritter M9 Ultraclave, the door will open automatically to release the steam. With the Ritter M9D AutoClave, the door has to be manually opened to release the steam.
The Ritter M9D autoclave has easy front access for filling and draining and has controls that are easy to understand.
Self Program Controls
Programmable controls allow for creation of different cycle parameters for special sterilization needs. Programmable buttons allow you to change the following: Time (3 to 90 minutes), Temperature (230 to 275º F), Dry Time (0 to 60 minutes), Vent (slow or fast) and two program buttons. The #1 and #2 buttons allow you to store the change if desired.
Pre-Programmed Controls
Four pre-programmed sterilization cycle controls: Unwrapped (132º C or 270º F for 3 minutes), Pouched (132º C or 270º F for 5 minutes), Packs (121º C or 250º F for 30 minutes), Handpiece (Dental Handpiece use only)
LCD Display
Indicates cycle selected, temperature and exposure time for selected cycle. During the cycle, the display shows messages describing status of cycle. When the cycle enters sterilization mode, remaining time is displayed as well as temperature and pressure.
Cycle Start
(Initiates selected cycle)
Manual Stop
(Terminates selected cycle or function)
The Ritter M9D Is The Right Thing to Do For Your Staff and For Your Practice
Your staff's time is precious, so why waste it? Break free from your sterilizer with the reliable and efficient Ritter M9D AutoClave Automatic Autoclave and spend your time on more important tasks. Make the industry-leading autoclaves your choice for sterilization and have peace of mind.
What do you want in a autoclave?
- Patented automatic opening door
for fast instrument drying
- Fast and easy use for efficient instrument processing
- Reliable and effective for quality infection control
- Maximum space utilization and a complimentary design for your sterilization area
Our full line of autoclaves address all of your important critical cleaning needs. In fact, we're sure you'll find
a Ritter autoclave that's just right for your practice.
Ritter M9D AutoClave Automatic Autoclave Specifications
Overall length w/plug: 20.4" (51.8 cm)
Overall width: 15.3" (38.9 cm)
Overall height w/printer: 15.8" (40.1 cm)
Minimum Countertop area: 15.3" x 17.9" (38.9 cm x 45.4 cm)
Chamber:
9" diameter (22.9 cm) 15" depth (38.1 cm)
3.5 gal. usable volume (13.4 liters)
Trays:
Two large – 7.3" W x 12" L x .8" D (18.6 cm x 30.5 cm x 2.2 cm)
Two small – 5.6" W x 12" L x .8" D (14.3 cm x 30.5 cm x 2.2 cm)
Unit weight: 73 lbs. (33.1 kg)
Shipping weight: 81 lbs. (36.7 kg)
Water reservoir capacity: 1.1 gal. (4.1 liters)
Electrical Requirements:
115 VAC, 50/60 Hz, 15 Amps Single Phase
115 VAC has 1425 watt tubular immersion heater
UL61010A-1, UL61010A-2-041
CAN/CSA C22.2 No. 1010
CAN/CSA C22.2 No. 1010.2-041-96
Meets the requirements of ASME Boiler and Pressure Vessel Code
A separate (dedicated) circuit is recommended for this sterilizer.