Welch Allyn Atlas Patient Monitor

Advanced surgical techniques, new anesthetics, the need to lower healthcare costs—they’re all pointing toward more outpatient surgeries and procedures in hospitals, surgicenters and physician offices. That’s why you need the Welch Allyn Atlas monitor, a vital signs monitor specifically designed to monitor patients during conscious sedation and IV anesthesia procedures for these markets.

Designed with input from physicians and nurse anesthetists, this conscious sedation monitor offers bright, clear, “across-the-room” visibility with large LED readouts and crisp waveform displays, giving you at-a-glance convenience and more time to concentrate on your patient. The intuitive design means users can learn to operate the monitor in just minutes.

The Atlas monitor goes where your patient goes, effortlessly. Lightweight and portable, it can be set on a cart or countertop, wheeled on its own dedicated mobile stand, mounted on the wall or carried using the integrated side handle.

We offer the flexibility to configure the monitor that best fits your needs, and it’s upgradeable, should your needs change in the future. Best of all, it’s at a cost that you can afford.

• 3- or 5-lead ECG—includes heart rate display with programmable alarms.
• Motion-tolerant pulse oximetry—Nellcor Puritan Bennett brand includes programmable, low-alarm limit and pulse tone feature, plus real-time plethysmograph waveform.
• NIBP—automatic blood pressure mode with 7 measurement interval choices and programmable alarm limits.

• Temperature—uses skin sensor temperature probe compatible with YSI series 400 thermistor probes.
• Respiration—real-time waveform, adjustable sweep speed and programmable alarm limits.
• ETCO2—provides numeric and waveform data using sidestream technology. Special features include respiration rate and programmable alarms.

• Completely upgradeable—maximize your investment even if your needs change in the future.
• Trend memory for up to 144 sets of patient data.
• Optional dual-trace printer for waveform and trend recording. Print-on-alarm feature immediately documents a patient alarm or invalid measurement, saving time during procedure and charting process.
• Optional battery for short-term transport or low-power conditions.
• Optional RS232 interface with nurse call capability.

• Plastic & Reconstructive Surgeons
• Oral/Maxillofacial Surgeons
• Pain Control Clinics
• Anesthesiologists
• Gastroenterologists
• Podiatrists
• Reproductive Fertility Specialists
• Urgent Care Centers
• Oncology/Hematology Clinics

• Surgery & Recovery

• Emergency Department
• Outpatient Surgery & Recovery
• Endoscopy > Radiology/Imaging
• Other Special Procedure Areas

3-Lead or 5-Lead Selectable ECG
Heart Rate Range: 20-250 bpm
Heart Rate Accuracy: ±3 bpm or ±3%, whichever is greater
Bandwidth: 0.5-40 Hz (monitor mode) or 0.05-100 Hz (extended mode)
Display Sweep Speeds: 25, 12.5 or 6.25 mm/sec

Noninvasive Blood Pressure
Systolic Measurement Range: 60-250 mmHg
Diastolic Measurement Range: 30-160 mmHg
Blood Pressure Accuracy: Meets AAMI SP10-1992 Standard
Operating Modes: Manual (single determination) or Automatic Mode
Cycle Interval Choices: 1, 3, 5, 10, 15, 30 or 60 minutes

Pulse Oximetry (Nellcor Puritan Bennett™)
Measurement Range: 40-100%
Accuracy: ±2 digits (no motion), ±3 digits (with motion) in the range of 0-100%
Pulse Rate Range: 20-250 bpm
Pulse Rate Accuracy: ±3 digits (no motion), ±5 digits (with motion)

Temperature
Range: 17-50° C (62.6-122° F)
Accuracy: Meets ASTM Accuracy Standards
Probe Type: YSI Series 400 Compatible

Impedance Respiration
Range: 5-100 breaths per minute
Accuracy: ±3 breaths per minute

End Tidal Carbon Dioxide
Measurement Technique: Sidestream
Measurement Range: 0-98 mmHg
ETCO2 Accuracy: 0-40 mmHg ±3 mmHg; 41-98 mmHg ±10% of reading
Breath Rate Measurement Range: 5-100 breaths per minute
Breath Rate Accuracy: ±1 breath per minute or ±5%, whichever is greater

General
Size: 35 cm x 23 cm x 25 cm (13.8” x 9.1” x 9.8”)
Weight: 4.3-5.5 kg (9.5-12.1 lbs) dependent on configuration
Power Requirements: 120 VAC, 50/60 Hz; 240 VAC, 50/60 Hz
Printer: Thermal array, prints waveforms and numerical trends
Battery: Lead acid, rechargeable